TOP-QUALITY PARTICLEBOARDS DIRECTLY FROM THE MANUFACTURER
Wood-based particleboards are a solid wood alternative that is in keeping with the times, as wood chipboard panels are resource-saving, easy to work with and have consistent characteristics. As a manufacturer of raw chipboard panels, Pfleiderer offers numerous varieties for high-quality solutions for a wide range of areas - made in Germany and, on request, PEFC or FSC certified.
Browse our ParticleBoard Portfolio
With our raw chipboard panels, we offer your precisely the right material for a wide range of different requirements. Whether low emission or flame retardant, sound insulating, load-bearing or low swelling - discover our particleboards for economical and high-quality results.
Efficient and proven: raw chipboard panels for furniture and interior design elements
Chipboard bonded with 100 % biogenic, formaldehyde-free glue (OrganicGlue) with a recycled wood content of 100 % type P2 conforming to EN 312, suitable for non-load-bearing purposes in dry areas.
Urea resin-bonded particleboard, type P2 conforming to EN 312, suitable for non load-bearing purposes in dry areas.
Low emission particleboard core type P2, suitable for non load-bearing purposes in dry areas.
Low emission particleboard core type P2, suitable for non load-bearing purposes in dry areas.
Melamine resin bonded particleboard type P3, suitable for non load-bearing purposes in damp areas.
Wood particleboard type P4 in accordance with EN 312, for structural purposes for use in dry conditions.
Flame resistant particleboard, suitable for non load-bearing purposes in dry areas, for interior fitting and for furniture subject to higher demands on fire protection.
Formaldehyde-free glued and sanded particleboard, type P5 in accordance with EN 312, suitable for load-bearing purposes in damp areas.
PremiumBoard MFP Hybrid consists of a PremiumBoard MFP as core layer combined with StyleBoard HDF as top layers with a thickness of 2 mm that can also be laminated on both sides. The MFP and HDF panels are glued using PVAC-glue (D4-glue). Due to its isotropic bending strength, its very good screw-holding strength and its high durability, the Hybrid wood-based panel is mainly suited for applications where high stability and load-bearing capacity are required.
Wood particleboard Type P4 conforming to EN 312, for load-bearing use in dry conditions, sanded and 100% formaldehyde-free glued.
Formaldehyde-free glued and sanded particleboard, type P5 in accordance with EN 312, suitable for load-bearing purposes in damp areas.
Chipboard type P5 according to EN 312, for structural use in humid conditions, unsanded and bonded 100% formaldehyde-free.
Weight-reduced, urea resin bonded particleboard as per CEN/TS 16368 LP1.
Healthy and sustainable: our timber construction particleboard portfolio
Wood particleboard type P5 in accordance with EN 312, for load-bearing purposes for use in damp areas, sanded and with increased water vapor diffusion resistance.
Formaldehyde-free glued and sanded particleboard, type P5 in accordance with EN 312, suitable for load-bearing purposes in damp areas.
Wood particleboard Type P4 conforming to EN 312, for load-bearing use in dry conditions, sanded and 100% formaldehyde-free glued.
Formaldehyde-free glued and sanded particleboard, type P5 in accordance with EN 312, suitable for load-bearing purposes in damp areas.
Chipboard type P7 according to EN 312, highly load-bearing, for structural use in humid conditions, sanded and bonded 100% formaldehyde-free.
Chipboard type P5 according to EN 312, for structural use in humid conditions, unsanded and bonded 100% formaldehyde-free.
Chipboard type P7 according to EN 312, highly load-bearing, for structural use in humid conditions, unsanded and bonded 100% formaldehyde-free.
Durable and high load-bearing: Pfleiderer's particleboards for warehouse shelving
Wood particleboard type P4 in accordance with EN 312, for structural purposes for use in dry conditions.
Wood particleboard type P6 in accordance with EN 312, heavy-duty, for structural purposes for use in dry conditions.
Wood particleboard type P6 in accordance with EN 312, heavy-duty, for structural purposes for use in dry conditions.
Wood particleboard type P7 in accordance with EN 312, heavy-duty for structural purposes for use in humid conditions.
Wood particleboard type P4 in accordance with EN 312, for structural purposes for use in dry conditions, flame resistant.
Wood particleboard type P6 in accordance with EN 312, heavy-duty, for structural purposes for use in dry conditions, flame resistant.
High quality and stable: our raw chipboard for raised floors & others
Wood particleboard type P7 in accordance with EN 312, heavy-duty for structural purposes for use in humid conditions.
Wood particleboard type P4 in accordance with EN 312, for structural purposes for use in dry conditions.
Wood particleboard type P6 in accordance with EN 312, heavy-duty, for structural purposes for use in dry conditions.
Wood particleboard type P6 in accordance with EN 312, heavy-duty, for structural purposes for use in dry conditions.
Wood particleboard type P4 in accordance with EN 312, for structural purposes for use in dry conditions, flame resistant.
Wood particleboard type P6 in accordance with EN 312, heavy-duty, for structural purposes for use in dry conditions, flame resistant.
Resistant and versatile: chipboards for packaging
Formaldehyde-free glued and sanded particleboard, type P5 in accordance with EN 312, suitable for load-bearing purposes in damp areas.
Chipboard type P5 according to EN 312, for structural use in humid conditions, unsanded and bonded 100% formaldehyde-free.
Robust and dimensionally stable: our panels for concrete formwork
Wood particleboard type P7 in accordance with EN 312, heavy-duty for structural purposes for use in humid conditions.
Formaldehyde-free glued and sanded particleboard, type P5 in accordance with EN 312, suitable for load-bearing purposes in damp areas.
Formaldehyde-free glued and sanded particleboard, type P5 in accordance with EN 312, suitable for load-bearing purposes in damp areas.
Chipboard type P7 according to EN 312, highly load-bearing, for structural use in humid conditions, sanded and bonded 100% formaldehyde-free.
Chipboard type P5 according to EN 312, for structural use in humid conditions, unsanded and bonded 100% formaldehyde-free.
Chipboard type P7 according to EN 312, highly load-bearing, for structural use in humid conditions, unsanded and bonded 100% formaldehyde-free.
ParticleBoards - thoroughly impressive
Particleboards, often also called chipboards, belong to the most important sheet wood materials. They consist of variously sized wood chips that are mixed with bonding agents and then pressed into sheets. Particleboards have a firm place in modern timber construction, interior design and furniture making, because they are:
- suitable for a wide range of uses
- easy to work with
- more affordable than solid wood
- resource-efficient, as they are made of renewable raw materials and recycled wood
- easilyrecyclable
Materials for plenty of potential areas of use
Whether for dry or humid conditions, for fire protection areas, in large formats or as floor panels with tongues and grooves – Pfleiderer offers a wide range of raw chipboard panels with various different properties and in all kinds of versions to suit your industrial and commercial applications:
- Furniture making and interior design elements
- Timber construction
- Formwork construction
- Roof and floor constructions
- Packaging construction
- Storage technology
- etc.
Chipboard panels - benefit the environment
At a time of heightened environmental consciousness, projects are increasingly focused on sustainability and conserving resources.Especially in this respect, Pfleiderer's particleboards can make an important contribution as it is manufactured from natural, renewable raw materials.
Cascade use and a high recycled material content ensure that the wood is also used over a long period of time and that the greenhouse gas CO₂ remains sequestered.
Manufactured with innovative technologies that minimise the impact on the climate, Pfleiderer's particleboards are guaranteed eco-friendly, healthy and high-quality materials – even in the second life cycle of the green raw material!
More about sustainable engineered wood products
Certified sustainable: Pfleiderer raw chipboard panels
As a particleboard manufacturer based in Germany, we focus on certified, low-emission products – for solutions without compromise when it comes to quality, ecology and sustainability.
Planning made simple: BIM Data for your projects
Pfleiderer’s digital services simplify the design process, from the initial concept through to its realisation. BIM data for Archicad, AutoCAD, Revit as well as Ifc files are available for many of our raw chipboard panels. Simply integrate them directly into your planning tool and discover the wide range of possibilities Pfleiderer's particleboards offer you.
Proven in practice - our Reference projects
FAQs – Frequently asked questions about Particleboards
What standards apply for particleboards?
The requirements to be met by particleboards manufactured are specified in the European Standard EN 312. According to this standard, particleboards are divided into seven panel grades:
- Type P1 – general purpose boards for use in dry conditions
- Type P2 – boards for interior fitments (including furniture) for use in dry conditions
- Type P3 – non load-bearing boards for use in humid conditions
- Type P4 – load-bearing boards for use in dry conditions
- Type P5 – load-bearing boards for use in humid conditions
- Type P6 – heavy duty load-bearing boards for use in dry conditions
- Type P7 – heavy duty load-bearing boards for use in humid conditions.
How environmentally friendly is particleboard?
Using particleboards is eco-friendly in several ways, as Pfleiderer's particleboards consist of over 90% of wood, which is a natural raw material. Besides waste wood from industrial sawmills and forestry thinning, we use untreated recycled wood. We source 90% of the wood we use close to our plants. In addition, our suppliers are required to demonstrate that they comply with the FSC and PEFC standards .
The use of wood as a resource is an optimal material cycle that also reduces pressure on forest resources and protects the climate through the CO2 stored in wood. Increasing the use of high-quality engineered wood products is therefore an important contribution to climate protection and the preservation of our living environment.
What size are Pfleiderer's raw chipboard panels?
To provide economical trade, industrial and construction solutions, Pfleiderer offers raw chipboard panels in large sheet formats leading to as few offcuts as possible, as well as more compact sizes, and also in the form of floor panels with tongues and grooves.
The raw chipboard panels are available in many standard formats with a thickness ranging from 8 to 50 mm. The standard lengths for unfaced panel formats range from 2500 mm to 5600 mm, the widths from 1250 mm to 2100 mm. Pfleiderer's tongue-and-groove particleboard sheets are available in the sizes:
- 1,710 x 690 mm
- 2,050 x 615 mm
- 2,050 x 925 mm
- 2,500 x 615 mm
- 2,510 x 635 mm
Please refer to our Product Finder for details of the formats available for each individual particleboard type.
MORE INFORMATION ABOUT PFLEIDERER'S RAW CHIPBOARD PANELS
Find out all you need to know about chipboard for storage in our brochure, which provides a comprehensive overview of our products and how they can be used.
Would you like to learn more?
Contact
Please get in touch with us directly! We look forward to hearing from you.
Product enquiries and sales department.
+49 (0) 9181 28-480