Areas of application

Symbol chest of drawersFurniture and interior fitting

Product features

Icon image with brushIndividual printed motif
Icon plate being cleanedEasy care
Icon with crossed-out bacteria/virusesAntimicrobial
Icon with a glass and a forkFood harmless
Icon with 2 cloudsParticularly low emission

Areas of application

Individual furniture and interior fitting elements, wall fittings and partitions, shopfitting, trade fair stands, boatbuilding, caravans, hotels, spas, medical centres, offices and living spaces. You will find the right, individually tailored product for every requirement notably if special low emissions are needed. Not suitable for horizontal surfaces and or surfaces exposed to mechanical loads.

Certificates & labels

Blue Angel DE-UZ 76

The Blue Angel has been the federal government's eco-label for 40 years. Independent and credible, it sets demanding standards for environmentally friendly products and services. The Blue Angel is the orientation for sustainable purchasing.

Cradle to Cradle Certified® Bronze

Cradle to Cradle is a concept for a continuous and consistent circular economy. C2C certification (Cradle to Cradle Certified product standard) assesses products across five performance categories: material health, material reutilisation, renewable energy and carbon management, water stewardship and social fairness.

FSC-certified

The Forest Stewardship Council (FSC) is a global, not-for-profit organization dedicated to the promotion of responsible forest management worlwide. FSC defines standards based on agreed principles for responsible forest stewardship that are supported by environmental, social and economic stakeholders.

Nordic Swan Ecolabel

The Nordic Swan Ecolabel works to reduce the environmental impact from production and consumption of goods – and to make it easy for consumers and professional buyers to choose the environmentally best goods and services.

PEFC certified

PEFC is the largest institution for ensuring sustainable forest management through an independent certification system. Wood and wood products with the PEFC seal originate demonstrably from ecologically, economically and socially sustainable forestry.

Qualitätszeichen Holzwerkstoffe

The Qualitätsgemeinschaft Holzwerkstoffe e.V. awards the "Wood-Based Panels Quality Mark" to products that meet the quality criteria of the association. These products are of good quality, technically safe and harmless to human health and the environment.

Product section

Availability

Formats

Length (mm)Width (mm)Thickness (mm)
2,8002,10019

Product features

Product standard

  • In accordance with EN 14322

Core material

  • ClassicBoard P2 F****: Low emission particleboard core, type P2 conforming to EN 312, suitable for non load-bearing purposes in dry areas.

Reaction to fire

  • D-s2,d0 conforming to EN 13986 dependent on end use (Thickness: ≥ 9 mm / Gross density: ≥ 600 kg/m³)

Formaldehyde emission class

  • F****
  • E1 E05

Antimicrobial effect

  • Surface with antimicrobial effect in 24 h for interior fit-out and finishes – Test Methodology JIS Z 2801 / ISO 22196

Product safety

  • This product follows the REACH regulation EC 1907/2006 an article. Following Article 7 it does not need to be registered.
  • The surface is physiologically safe, and approved for direct contact with food acc. to Regulation (EU) No. 10/2011.
  • We manufacture the panels without the use of halogens, heavy metals, preservatives, wood protectors or organic solvents.

Special

  • Maximum motif format per board, incl. overprinting: 2,750 mm x 2,030 mm. Larger motifs can be tiled.
  • Cut to size is not available.
  • Standard delivery without protective film.
  • Colour differences can occur in follow-up production lots.
  • FSC certification or PEFC certification available on request.

Colour and surface match

  • Decor, structure and core board all influence the final appearance of the end product.
  • Due to the product-specific differences in production technologies, even identical decor/structure/core board combinations can result in slight optical and tactile deviations across different product groups and formats. Such deviations do not constitute a defect.
  • The choice of surface structure in particular has a significant influence on the visual impression, the tactile perception as well as the technical characteristics of the product. Thus, the overall impression of a decor can change almost completely depending on the surface structure. Furthermore, mechanical influences on the product surface can lead to a higher contrast optical perception with dark decors.
  • To ensure that you always achieve the best results with our products and to clarify any deviations in advance, we will be happy to advise you individually.

Product handling

Processing

  • If possible, each motif is produced around the circumference with an overfill of approx. 15 mm and accordingly cutting marks are set.
  • The motif cutting marks are not binding; therefore, each motif format must be checked before cutting to size.
  • Sawing or formatting the boards in a stack is not possible.
  • Assignment of the motifs parallel with the edge of the coreboard is not possible for production reasons.
  • Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be at the normal climatic conditions in which the material will later be used.
  • Cutouts and inside corners must have a minimum radius of 8 mm to prevent notch stresses and therefore possible subsequent formation of cracks.

Machines and tools

  • Can be worked with carbide (HW) or diamond (DP) tipped tools on conventional woodworking machines.

Edging

  • Thick and thin edges are suitable.
  • EVA and PUR hotmelts are recommended for edge adhesion.

Fitting technology

  • All conventional removable and non-removable fittings for solid wood and wood materials are suitable.

Installation and assembly

  • Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be at the normal climatic conditions in which the material will later be used.
  • Please ensure that the material is processed and fitted correctly and using the best available technology.
  • The material is not suitable for areas subject to large fluctuations in temperature and humidity.

Storage, handling and transport

  • On level, full area surfaces (e.g. pallets), protected against moisture, in dry, ventilated rooms. Outdoor storage is not suitable.
  • Please note that incorrect storage, regardless of its duration, may cause irreversible distortion to the sheets.
  • Foreign bodies or impurities in the pallet of sheets can lead to impressions and damage to the surface of the board.
  • Sheets / boards must not be moved against each other, they should be moved individually by hand or with suction equipment.
  • Ensure that sufficiently large and sturdy bases, e.g. pallets, are used for the transportation of stacked sheets. The sheets on the pallet must be secured against slipping.

Health and safety

  • Please wear the appropriate personal protective equipment (PPE) when processing and handling.
  • Provide adequate extraction when splitting / sanding.

Cleaning and care

  • The surface can be cleaned with water and gentle cleaning agents.
  • The use of cleaning products, cloths, sponges with abrasive ingredients, should be avoided.
  • For removal of particularly stubborn stains, industrial cleaners suitable for plastic surfaces can be used. Before use we would recommend testing in a small, hidden area.

Disposal

  • We recommend material or energy recovery in approved plants.

You like to learn more?

Please get in touch with us! We look forward to hearing from you.

Product enquiries and sales department

+49 (0) 91 81 28 48 0